Part #: 511-521
ABSOLUTE Digimatic Bore Gages - Inch/Metric
Lowest Price Guaranteed
The Mitutoyo 511-521 Absolute Digitmatic Bore Gage is one of Mitutoyo's most popular bore gages. Additional extensions rods are available for the 511-521 if the operator needs to take a measurement deeper into the bore than what the standard gage will allow.
- The minimum value holding function provides the easy detection of hole diameter.
- Up to three sets of master value and upper/lower tolerance value can be memorized.
- An analog bar indicator is integrated to enhance the intuition in reading.
- GO/±NG judgment is performed by setting the upper and lower tolerances.
- Up to four rods (250mm or 500mm) can be used.
- Accuracy: Wide Range: 0.003mm/.00012"
- Narrow Range:0.002mm/.00008" Resolution:.00005"/0.001mm
- Battery: SR44 (1 pc.)(938882)
- Battery life:Approx.9 months for normal use
- Dust/Water protection level: Conforming to IP53
- Origin-set, Zero-Setting, Presetting, Power on/off, inch/mm conversion (inch/mm type only), Data output, GO/±NG tolerance judgment
- Alarm: Low battery voltage, scale contamination, over-flow error, tolerance limit setting error