Part #: 54-364-550
XTD Electronic Holemike Readout # 54-364-550
Lowest Price Guaranteed
54-364-550 Fowler/Bowers Electronic Holemike Readout
The Fowler 54-364-550 is to be used with Fowler/Bowers XT heads in the range of .250-.375/6-10mm. This electronic holemike readout will not be compatible with XT heads outside of the stated range. The Fowler/Bowers electronic holemike bore gages are one of today’s most popular bore gage. If you are replacing a current readout or looking to purchase additional electronic holemike readouts, please note that each electronic holemike is intended to be used with Fowler/Bowers XT heads within a specific range.
The Fowler/Bowers XT Electronic Holemikes are the new generation of the Fowler/Bowers bore micrometers. The XT electronic holemike bore gages now have extended travel with fixed anvils. Operators no longer have to worry about switching out the anvils as in past generations. All XT Electronic Holemikes come standard with a ratchet stop which ensures better repeatability among operators. The “two-button” electronics are easy to operate and have the capability of storing up to three preset sizes. The holemikes have RS-232 output and can be connected to a laptop or PC by cable (see below) or wirelessly.
The 54-364-550 Electronic Holemike comes with a 5-year warranty. These digital internal micrometers are manufactured in England by Bowers Metrology, one of the most respected bore gaging companies in the world. Top quality products usually come with a great warranty and the Fowler/Bowers XT Electronic Holemikes are backed with the best warranty in the industry.
- Large easy-to-read display
- Direct inch/metric conversion
- Ratchet stop for consistent measurement
- Resolution: .00005"/.001mm
- RS-232C output
- Setting rings included in all sets
- Includes UKAS certificates for all micrometers and setting rings
- Special anvils available
Below is a list of all the Fowler/Bowers XT Electronic Holemike Readouts:
- 54-364-556 is to be used with Fowler/Bowers XT heads from .080-.250”/2-6mm
- 54-364-550 is to be used with Fowler/Bowers XT heads from .250-.375/6-10mm
- 54-364-551 is to be used with Fowler/Bowers XT heads from .375-.750”/10-20mm
- 54-364-552 is to be used with Fowler/Bowers XT heads from .750-2.0”/20-50mm
- 54-364-553 is to be used with Fowler/Bowers XT heads from 2.0-4.0”/50-100mm
- 54-364-554 is to be used with Fowler/Bowers XT heads from 4.0-8.0”/100-200mm
- 54-364-557 is to be used with Fowler/Bowers XT heads from 8-12”/200-300mm
There are two RS-232 cables available that can be used with the 54-364-550 Electronic Holemike Readout: