• Part #: 543-266B

    canquote

    ABSOLUTE Digimatic Indicators for Bore Gages - Inch/Metric

    ABSOLUTE Digimatic Indicators for Bore Gages - Inch/Metric

    Manufacturer: Mitutoyo

    Range/Size: 0-.500"/12.7mm

    Graduations: .00005"/.001mm

    Price:  

    Lowest Price Guaranteed



    Product Description:

    ******************************DISCONTINUED PRODUCT******************************

    The Mitutoyo 543-266B Absolute Digimatic Indicator ID-C Bore Gage Type has now been discontinued and replaced by the new Mitutoyo Digimatic Indicator for Bore Gages Type: 543-312B.

    543-266B Mitutoyo ABSOLUTE Digimatic ID-C Series for Bore Gages: 0-.500"/12.7mm

    The Mitutoyo 543-266B absolute digimatic indicator for bore gages has the following specifications:

    • Range: 0-.500"/12.7mm
    • Resolution: .00005"/.001mm
    • Accuracy: .00012"
    • Stem/Shank: 3/8"
    • Contact Point: # 4-48

    Features:

    • The minimum value holding function provides the easy of detection of bore diameter.
    • An analog bar indicator is displayed on the top of the readout.
    • Go and No-Go tolerances can be set with upper and lower limits
    • 3 references which will hold three presets into the electronics
    • Employing the ABSOLUTE linear encoder, the Signal ID-C always displays the spindle absolute Position" from the origin at power-on.

    The Mitutoyo 543-266B can be used with other brands but is the recommended electronic indicator to be used with Mitutoyo Bore Gages.

    Technical Data

    • Display: LCD
    • Length standard: ABSOLUTE electrostatic capacitance type linear encoder
    • Max. response speed: Unlimited
    • Measuring force: 1.5N or less
    • Battery: SR44
    • Battery life: Approx. 2000 hours under normal use
    • Dust/Water protection level: IP42

    Indicator Functions:

    • Origin-set/Preset, Zero set, GO/±NG judgment, Power ON/OFF, Data output, inch/mm conversion (on inch/metric models only)
    • Alarm: Low voltage, Counting value composition error, Over-flow error, Tolerance limit setting error

    Mitutoyo ABSOLUTE Digimatic ID-C Series Electronic Indicators for Bore Gages - Inch/Metric:

    • 543-266B ID-C Series Electronic Indicator for Bore Gage: 0-.500"/12.7mm (.00005"/.001mm)
    • 543-267B ID-C Series Electronic Indicator for Bore Gage: 0-.500"/12.7mm (.0001"/.001mm)

    Mitutoyo ABSOLUTE Digimatic ID-C Series Electronic Indicators for Bore Gages - Metric:

    • 543-264B ID-C Series Electronic Indicator for Bore Gage: 0-12.7mm (.001mm)

Related Products