Part #: 543-557A
ABSOLUTE Digimatic Indicator # 543-557A
Lowest Price Guaranteed
543-557A Mitutoyo ABSOLUTE Digimatic Indicator ID-F with Back-lit LCD Screen: 50mm
The Mitutoyo 543-557A ABSOLUTE Digimatic Indicator has the following specifications:
- Range: 50mm
- Resolution: 0.001mm
- Accuracy: 0.003mm
- Stem/Shank: 8mm
- Contact Point: M2.5 x 0.45 Thread
- With the ABSOLUTE Linear Encoder technology, once the measurement reference point has been preset it will not be lost when the power is turned on.
- GO/±NG judgment is performed by setting the upper and lower tolerances. If a judgment result is out of tolerance, the display backlighting changes from green to red, so tolerance judgment can be made at a glance.
- An analog bar indicator has been integrated to handle upper/lower limit approaching and zero approaching. It enhances the ease of operation in the same manner as a dial indicator. The display range of the analog bar can be changed.
- With SPC data output.
- Accuracy: Refer to the list of specifications.
- Display: LCD
- Length standard: ABSOLUTE electrostatic capacitance type linear encoder
- Max. response speed: Unlimited
- Measuring force: 1.8N/2.3N* or less (*50mm range models)
- Power supply: 9V DC (via AC adaptor)
- GO/±NG judgment
- Max/Min value hold
- Runout measurement
- Resolution switching
- Counting direction switching
- Power ON/OFF
- Data output
- Inch/mm conversion (on inch/metric models only)
- Alarm: Low voltage
- Counting value composition error
- Over-flow error
- Tolerance limit setting error
ID-F Digimatic Indicators:
Mitutoyo ABSOLUTE Digimatic Indicator ID-F with Back-lit LCD Screen - Inch/Metric
- 543-552A ABSOLUTE Digimatic Indicator ID-U Series: 1"/25.4mm
- 543-558A ABSOLUTE Digimatic Indicator ID-U Series: 2"/50.8mm
Mitutoyo ABSOLUTE Digimatic Indicator ID-F with Back-lit LCD Screen - Metric
- 543-551A ABSOLUTE Digimatic Indicator ID-U Series: 25mm
- 543-557A ABSOLUTE Digimatic Indicator ID-U Series: 50mm