Mitutoyo ABSOLUTE Digimatic Bore Gages – Inch/Metric
Product Code: 511-521MFGID: 511-521
Brand: Mitutoyo
Product Description
511-521 Mitutoyo Absolute Digimatic Bore Gage: 1.8-4.0″/45-100mm
The Mitutoyo 511-521 Absolute Digimatic Bore Gage has the following specifications:
- Range: 1.8-4.0″/45-100mm
- Resolution: .00005″/.001mm
- Accuracy: .00012″/.003mm
- Probe Depth: 6″/152.4mm
Features:
- Available in Inch/Metric models
- Measuring ranges available are 1.8-4.0″/45-100mm and 4.0-6.5″/100-160mm
- Optional extension rod allows for measuring holes past 6 inches; up to four rods can be used at a time
- Optional setting rings for zero point adjustment are available
- Go/No-Go judgment is performed by setting the upper and lower tolerances
- Design allows for measurements closer to the bottom of blind bore holes
- SPC output function allows for easier, faster data management in real time
- ABSOLUTE (ABS) linear scale eliminates the need for setting the origin point every time the micrometer is powered on
- Functions include Origin Set, Zero/ABS Setting, GO/NO-GO judgment, power On/Off, and inch/mm conversion
- Alarms include low battery voltage, scale contamination, over-flow error, tolerance limit setting error
- Supplied in fitted wooden case
Technical Data:
- Technology: Digimatic
- Units: Inch/Metric
- Display: LCD
- Battery: SR44
- Battery life: Approx. 9 months months under normal use
- SPC Output: Yes
- IP Rating: IP53
- Repeatability Error: 0.0001″/0.002mm
- Adjacent Error: 0.00008″/0.002mm
- Probe Depth: 6″/154.2mm
- Mass: 500g
The Mitutoyo 511-521 ABS Digimatic bore gage measures highly accurate bore hole diameters quick and easy on a large, easy-to-read LCD display. The Mitutoyo ABSOLUTE Digimatic digital bore gage takes inner dimension measurements to the next level with highly accurate, repeatable results that are easy to obtain. The gage’s minimum value holding function provides the easy detection of a hole’s diameter, and an integrated analog bar indicator enhances the intuition of the reading. The digital bore gage has an accuracy of +/- 0.00012″ with a resolution of 0.00005″/.001mm, and provides the measurements on an easy-to-read, dust and water resistant LCD display. The Mitutoyo Absolute Digimatic Bore Gage is one of Mitutoyo’s most popular bore gages. Additional extensions rods are available for operators who need to take a measurement deeper into the bore than what the standard gage will allow. SPC cables are also readily available for users who want to use data collection to capture the bore measurements. If you need assistance in selecting the correct setting rings to calibrate the bore gage prior to using, please contact our inside sales department and we would be more than happy to assist you.
Mitutoyo Absolute Digimatic Bore Gages:
- 511-521Â Absolute Digimatic Bore Gage: 1.8-4.0″/45-100mm
- 511-522 Absolute Digimatic Bore Gage: 4.0-6.5″/100-160mm
Only logged in customers who have purchased this product may leave a review.
Related Products
-
Request Quote
Reviews
There are no reviews yet.