It's still us but we have a new look on our website!
We have updated our website to better serve you
Find what you need faster and understand the precision measurement industry better on HigherPrecision.com. We have added to our website 600-800 new products
each week, a comprehensive resource center, and an instant request a quote feature.
A global distributor of precision measurement tools
781XTP-250 Accubore Pistol Grip Only with Indicator: .080-.250"/2-6mm
AccuBore® is a high-quality, trigger-activated, three-point contact bore gaging system with extended range. Its convenient single-hand operation provides speed and control. Simply squeeze the trigger, insert the gage into the bore and release the trigger for an instant reading from the large, easy-to-read digital
The 781XTP-250 has an indicator with easy to use electronics and RS-232 output.
What makes AccuBore® superior to other
gages are features like the mechanically-driven
parallel anvils which extend
simultaneously, establishing a more true
alignment to the axis of the bore. This
provides consistent pressure, resulting in
more accurate readings than models with
spring-driven contacts which are subject to
Speed and convenience are further enhanced by the repositionable AccuBore® indicator, which may be swiveled and rotated for left,
right hand or even vertical viewing. The 781XTP-250
also features a set of "go/no go" lights above
the readout display that quickly indicate
whether a bore measurement is within a
preset tolerance window.
Single-hand operation with right- and left-hand viewing flexibility
Large, easy-to-read display
Enhanced wear life with carbide-faced contacts – available from 1/2" to 8"
Convenient "Go/No Go" tolerance indicator lights
True alignment with mechanically-driven parallel anvils
Resolution .00005" (0.001mm)
Accuracy of up to .00015" (.004mm)
Push button inch/metric conversion
Preset and preset recall
Hold, max/min and zeroing capabilities
Blind bore measurement is standard from .50" (12.7mm) and above.
Specialized heads available for thread, groove and other non-standard measurements on request
Output capability for Statistical Process Control (SPC) analysis via devices such as the Starrett 772 Collector or 761 Multiplexer, or download of data directly to a PC by an RS232 connection (Direct to PC cable available on request.)