Starrett 123-12 W/SLC Master Vernier Caliper: 0-12″
Product Code: 123-12 W/SLCMFGID: 123-12 W/SLC
Brand: Starrett
Product Description
******************************DISCONTINUED PRODUCT******************************
The Starrett 123-12 W/SLC Vernier Caliper has now been discontinued and replaced by the new Starrett Master Vernier Caliper with Wooden Case: 123Z-12 W/SLC
123-12 W/SLC Master Vernier Caliper: 0-12�
Ultimate example of slide caliper design. It is more accurate, has the easiest reading vernier style, is stronger and offered in much longer lengths than other slide calipers.
Readability Features:
- Long 50-division vernier scales permit half as many bar graduations as conventional single-vernier tools. These widely-spaced graduations make it easy to read to .001″ or 0.02mm.
- The open-face design of the slide allows both the inside and outside vernier scale on the same side, thus allowing both verniers to be read without turning the tool over.
- Black lines and figures against the Starrett satin chrome finish make reading a pleasure, not an effort.
- Screw-type adjusting nut allows for fine measuring adjustments and lock nut holds measurements.
The 123-12 W/SLC vernier caliper has an approximate jaw depth of 2-5/16″.
Long-Life and Accuracy Features:
- Fine tool steel construction makes the jaws harder and longer-wearing than stainless tools. All tools through 24″ (600mm) also have hardened and stabilized bars.
- Hardened, ground and lapped measuring surfaces
- Machine divided graduations for accuracy
- The combination straight and angular ways on the master bar allow for positive alignment of graduations and easy adjustment of the flush-fitting verniers.
- Sizes through 24″ have divider points on the back side to accurately set dividers and trammels.
- Tools with inch and millimeter graduations on the same bar have outside readings only. (Inside readings must be compensated for by adding the nib width to the indicated reading.)
- The longer length of the adjusting jaw slide provides a longer bearing surface on the master bar, ensuring squareness with the solid jaw and extra resistance to springing.
- Tight, smoothly fitted slides for maximum accuracy and easy adjustment
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet.