Starrett CalipersStarrett 123EM-6 Master Vernier Caliper: 0-6″/150mm

Starrett 123EM-6 Master Vernier Caliper: 0-6″/150mm

Name: 123EM-6 Starrett Master Vernier Caliper - Series 123EM: 0-6"/150mm - Call 800-469-0132 or Buy Online
SKU: 123EM-6

Product Code: 123EM-6

MFGID: 123EM-6

Brand: Starrett

Range/Size: 0-6"/150mm

Graduations: .001"/.02mm

Request Quote

Product Description

******************************DISCONTINUED PRODUCT******************************

The Starrett 123EM-6 Vernier Caliper has now been discontinued and replaced by the new Starrett Master Vernier Caliper with Wooden Case: 123EMZ-6

123EM-6 Master Vernier Caliper: 0-6”/150mm

Ultimate example of slide caliper design. It is more accurate, has the easiest reading vernier style, is stronger and offered in much longer lengths than other slide calipers.

Readability Features:

Long 50-division vernier scales permit half as many bar graduations as conventional single-vernier tools. These widely-spaced graduations make it easy to read to .001″ or 0.02mm.

The open-face design of the slide allows both the inside and outside vernier scale on the same side, thus allowing both verniers to be read without turning the tool over.

Black lines and figures against the Starrett satin chrome finish make reading a pleasure, not an effort.

Screw-type adjusting nut allows for fine measuring adjustments and lock nut holds measurements.

The 123EM-6 vernier caliper has an approximate jaw depth of 40mm.

Long-Life and Accuracy Features:

Fine tool steel construction makes the jaws harder and longer-wearing than stainless tools. All tools through 24″ (600mm) also have hardened and stabilized bars.

Hardened, ground and lapped measuring surfaces

Machine divided graduations for accuracy

The combination straight and angular ways on the master bar allow for positive alignment of graduations and easy adjustment of the flush-fitting verniers.

Sizes through 24″ have divider points on the back side to accurately set dividers and trammels.

Tools with inch and millimeter graduations on the same bar have outside readings only. (Inside readings must be compensated for by adding the nib width to the indicated reading.)

The longer length of the adjusting jaw slide provides a longer bearing surface on the master bar, ensuring squareness with the solid jaw and extra resistance to springing.

Tight, smoothly fitted slides for maximum accuracy and easy adjustment