Mahr Inductive Digital Comparators
Product Code: 2034101MFGID: 2034101
Brand: MAHR
Product Description
2034101 Mahr Inductive Digital Comparator: 11.7mm / .46″
The Mahr 2034101 Inductive Digital Comparator has the following specifications:
- Range -mm/inch: ±1.00 / ±0.040″
- Resolution: 0.0002/.00001″
- Accuracy of digital range: ±0.50mm / ± .020″
- Stem Diameter: .375″
- Stem length: 11.7mm / .46″
- Spindle Range: -1.25 to 1.50mm / – .050 to + .060″
- Weight: 170 g / 6 oz
- Temperature Operating: 40° to 130°F
- Repeatability: ± 1 LSD (Least Significant Digit)
- Battery Life: 6000 hours
Features:
- Inch/Metric – operator selectable with switchable resolution.
- Normal/reverse sensing.
- Present capabilities to vie actual size.
- “Absolute” transducer – no overspeed errors or constant re-zeroing. Transducer always remembers its location, even if power is off.
- High resolution digital readout and analogue bar graph – digital display shows deviation from zero or actual dimension size (Preset).
- Lightweight, contamination Resistant – ruggedly built to withstand hard use gasketed case, crystal and stem assemblies resist fluid contamination.
- Calibratable – if ever needed – values remembered even after battery change.
- Marconnect data output choose either: USB or OPTO RS232C, digimatic.
- Auto – power down – provides extremely low battery consumption, assuring long life from readily available commercial batteries.
- Increased resolution (0.0002mm / 10?inch) for today’s demanding tolerances.
- Unilateral Tolerance.
- Go/NoGo Display features.
Advanced Functions:
- Dynamic mode operation: Max, Min, TIR.
- To points difference measurement – provides compassion of to readings or measuring locations. – Calculate the distance between 2 measured values.
- Multiple factor of ratio measurement.
- Hold Function – holds reading on display until ready to resume measuring.
- Data output with serial number identification capability.
- Data output with serial number identification continuous output or single request of reading(s).
Accessories:
- Flat Black (Standard on all models) – EBK-1018.
- Post Back ( .5″ dia. x 1″ long) – EBK-1012.
- Lug Back (Horizontal/Vertical) – 2210555.
- Screw Back (11/16″ dia x 5″, 1/4-28 thread) – 2210557.
- Adj. Slide Back(0.5″ slot, 1/4-20 thread) – 2210559.
- Adj. Rack Back* – 2210558.
- USB Cable (for MarCom or PC, 2 m length) – 4346023.
- RS232 Cable (SUB-D jack 9-pin, 2m length) – 4346020.
- Digimatic Cable (10 pin plug, 2 m length) – 4346021.
- Transmitter (Mahr t, used w/ FM1 Receiver) – 2121369.
- Splash Cover – 2212878.
- Adaptor Bushing (8mm to 3/8″) – BU-197.
- Thread Adaptor(M 2.5 to 4-48 thread) – AD-1851.
- Spring (for lighter gaging force: 35g) – SP-351.
Mahr Inductive Digital Comparators:
- 2034101 Inductive Digital Comparator: 11.7mm/.46″ – Standard
- 2034103 Inductive Digital Comparator: 38.0mm/1.50″ – Standard
- 2034105 Inductive Digital Comparator: 11.7mm/.46″ – Standard Diameter8 mm
- 2034107 Inductive Digital Comparator: 38.0mm/1.50″ – Standard Diameter8 mm
- 2034201 Inductive Digital Comparator: 11.7mm/ .46″ – Advanced
- 2034203 Inductive Digital Comparator: 38.0mm/1.50″ – Advanced
- 2034205 Inductive Digital Comparator: 11.7mm/.46″ – Advanced Diameter8 mm
- 2034207 Inductive Digital Comparator: 38.0mm/1.50″ – Advanced Diameter8 mm
- 2034401 Inductive Digital Comparator: 11.7mm/.46″ – Advanced Perpendicular
Only logged in customers who have purchased this product may leave a review.
Related Products
-
Add to Cart
Add to Cart
Add to Cart
Add to Cart
Add to Cart
Add to Cart
Add to Cart
Request Quote
Reviews
There are no reviews yet.