A global distributor of precision measurement tools

800.469.0132

PRODUCT CODE: 543-260

ABSOLUTE Digimatic Indicator Max./Min. Hold – Metric

Range: 0-12.7mm

Graduations: .001mm

This product has been discontinued.
View Recommended Product

Product Description

543-260 Mitutoyo ABSOLUTE Digimatic Indicator ID-C Series with Max./Min. Value Holding Function: 12.7mm

The Mitutoyo 543-260 ABSOLUTE Digimatic Electronic Indicator has the following specifications:

  • Range: 12.7mm
  • Resolution: .001mm
  • Accuracy: .003m
  • Stem/Shank: 3/8″
  • Contact Point: #4-48 UNF Thread
  • Type: ISO/JIS
  • Measuring Force: 1.5N or less
  • Display: LCD
  • Length Standard: ABSOLUTE electrostatic capacitance type linear encoder
  • Max. Response Speed: Unlimited
  • Dust/Water Protection Level: IP42

Features:

  • The maximum, minimum, or runout value can be displayed during measurement
  • GO/+/-NG judgement is performed by setting the upper and lower tolerances for max., min. and runout values.
  • High speed sampling ration of 50 times/s
  • Employing the absolute linear encoder, the Signal ID-C always displays the spindle “Absolute Position” from the origin at power-on

Functions:

  • Origin-set/Preset, Zeroset, GO/+/-NG judgement, Max/Min/Runout value holding, Counting direction switching, Power ON/OFF, data output, inch/mm conversion (on inch/metric models only)
  • Alarm: Low voltage, Counting value composition error, Over-flow error, Tolerance limit setting error

Optional Accessories:

  • 905338 SPC cable (40″/1m)
  • 905409 SPC cable (80″/2m)
  • 902011 Spindle lifting lever (ISO/JIS type)
  • 902794 Spindle lifting lever (ANSI/AGD type)
  • 540774 Spindle lifting cable (stroke: .4″/10mm)

Mitutoyo ABSOLUTE Digimatic Indicator ID-C Series with Max./Min. Value Holding Function:

ISO/JIS Type:

  • 543-300  Digimatic Indicator ID-C with Max./Min Value Hold: 0-12.7mm (Lug Back)
  • 543-300B Digimatic Indicator ID-C with Max./Min Value Hold: 0-12.7mm (Flat Back)
  • 543-301  Digimatic Indicator ID-C with Max./Min Value Hold: 0-.500″/12.7mm (Lug Back)
  • 543-301B Digimatic Indicator ID-C with Max./Min Value Hold: 0-.500″/12.7mm (Flat Back)

ANSI/AGD Type:

  • 543-302  Digimatic Indicator ID-C with Max./Min Value Hold: 0-.500″/12.7mm (Lug Back)
  • 543-302B Digimatic Indicator ID-C with Max./Min Value Hold: 0-.500″/12.7mm (Flat Back)

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Cart Summary
Close

No products in the cart.