A global distributor of precision measurement tools

800.469.0132

PRODUCT CODE: 543-302B

ABSOLUTE Digimatic Indicator Max./Min. Value Hold # 543-302B

Range: 0-.500"/12.7mm

Resolution: .00005"/.001mm

Price: $458 $412
Lowest Price Guaranteed
Quantity

Product Description

543-302B Mitutoyo ABSOLUTE Digimatic Indicator ID-C with Max./Min. Value Hold: 0-.500″/12.7mm

The Mitutoyo 543-302B ABSOLUTE Digimatic ID-C Indicator with Max./Min. Value Holding Function has the following specifications:

  • Range: 0-.500″/12.7mm
  • Resolution: .00005″/.001mm
  • Accuracy: +/- .0001″/.003mm
  • Flat Back
  • Stem/Shank: 3/8″
  • Contact Point: #4-48 Thread
  • Type: ANSI/AGD
  • Measuring Force: 1.5N or less
  • Model: ID-C112AEXB

The Mitutoyo ABS digital ID-C Max/Min value holding digital indicators feature peak hold function to provide fast, highly accurate maximum measurements. By setting upper and lower tolerances for maximum, minimum and runout values, the indicator performs Go/No-Go judgements for quickly checking tolerances on multiple workpieces. A Key Lock and Parameter Lock feature prevents accidental changing of settings during operation. The ID-C indicator shows readings on a large 11mm LCD display.

Features:

  • The new Peak Hold-Type Digimatic Indicator features both a Key-Lock and Parameter-Lock to prevent accidental changing of settings during operation.
  • Fast measurement frequency allows users to increase the number of readings per second, from 10 to 50, allowing for higher accuracy measurements of TIR and MAX/MIN
  • Improved parameter setting software
  • An analog bar provides easy-to-read values when scanning for Max, Min and TIR Values.
  • The maximum, minimum or runout value can be displayed during measurement.
  • Go/no-go judgment is performed by setting the upper and lower tolerances for max., min. and runout values.
  • Analog bar provides easy-to-read values when scanning for Max, Min and TIR values
  • ABSOLUTE (ABS) linear scale eliminates the need for setting the origin point every time the micrometer is powered on
  • Origin reset is not required even when data is re-displayed after disappearance due to insufficient illumination during use
  • SPC output function allows for fast and easy data management in real time
  • Alarm: Low voltage, counting value composition error, over-flow error and tolerance limit setting error
  • Unlimited response speed eliminates over-speed errors
  • IP42 for protection against objects greater than 1mm and water
  • Supplied in a fitted plastic case
  • Employing the ABSOLUTE linear encoder, the Signal ID-C always displays the spindle Absolute Position from the origin when turned on.
  • Any part number followed with a “B” means that model has a flat back (no lug)

For a two dimensional drawing of the Mitutoyo 543-302B Absolute Digimatic Indicator ID-C with Max./Min. Value Hold: Click Here

Functions:

  • Functions include Key lock, parameter lock, PC-USB input, analog bar, fast measuring frequency, peak detection, calculation, counting direction switching, power On/Off, data output and inch/mm conversion (on inch/metric models only)

Technical Data:

  • Display: LCD
  • Length standard: ABSOLUTE electrostatic capacitance-type linear encoder
  • Max. response speed: Unlimited
  • Measuring force: 1.5N or less
  • Battery: CR2032 (1 pc.), 05SAA217
  • Battery life: Approx. 12 months under normal use
  • IP Rating: Equivalent to IP-42*1

Optional Accessories:

  • 905338: Connecting Cable (1m)
  • 905409: Connecting Cable (2m)
  • 21EZA313: Parameter Setting USB Cable
  • 21EZA198: Spindle lifting lever (12.7mm ISO/JIS type)
  • 21EZA199: Spindle lifting lever (12.7mm ASME/AGD type)
  • 21EZA105: Lifting Knob (0-.500″/12.7mm ISO/JIS models)
  • 21EZA150: Lifting Knob (0-.500″/12.7mm ASME/AGD models)
  • 21EZA197: Lifting Knob (for 1″/25.4mm models)
  • 21EZA200: Lifting Knob (for 2″/50.8mm models)
  • 540774: Spindle lifting cable

Mitutoyo ABSOLUTE Digimatic Indicator ID-C Series with Max./Min. Value Holding Function:

ISO/JIS Type:

  • 543-300  Digimatic Indicator ID-C with Max./Min Value Hold: 0-12.7mm (Lug Back)
  • 543-300B Digimatic Indicator ID-C with Max./Min Value Hold: 0-12.7mm (Flat Back)
  • 543-301  Digimatic Indicator ID-C with Max./Min Value Hold: 0-.500″/12.7mm (Lug Back)
  • 543-301B Digimatic Indicator ID-C with Max./Min Value Hold: 0-.500″/12.7mm (Flat Back)

ANSI/AGD Type:

  • 543-302  Digimatic Indicator ID-C with Max./Min Value Hold: 0-.500″/12.7mm (Lug Back)
  • 543-302B Digimatic Indicator ID-C with Max./Min Value Hold: 0-.500″/12.7mm (Flat Back)

Related Products

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Cart Summary
Close

No products in the cart.