Product Description
543-390 Mitutoyo ABSOLUTE Digimatic Indicator ID-C Series Standard Type: 0-12.7mm
The Mitutoyo 543-390Â ID-C standard absolute digimatic electronic indicator has the following specifications:
- Range: 0-12.7mm
- Resolution: .001mm
- Accuracy: .003mm
- Stem/Shank: 8mm
- Contact Point: M2.5 x 0.45 Thread
- Measuring Force: 1.5N or less
- Type: ISO/JIS
- Model: ID-C112X
The Mitutoyo ABSOLUTE Digimatic ID-C standard-type indicators are highly accurate for short linear measurements and provide Go/No-Go judgements. Measurements are shown on an impact-resistant LCD display. The Mitutoyo ABS digital ID-C standard-type digital indicators provide up to a 12.7mm / .5″ range in a compact design that is easy to use and read. The ID-C indicator’s face can rotate 330° to enable easier readings on the large 9mm LCD display from nearly any angle. Large push buttons provide direct, easy access to all of the indictor’s functions, and the positive/negative count from the spindle’s up/down movement can be toggled. The ABSOLUTE sensor automatically restores the last origin position when the indicator is turned on, allowing for quick-start operation which is useful in multipoint measurements.
Features:
- Similar in size to standard Series 2 dial indicators
- Available in Metric and Inch/Metric models
- Available with SPC output capabilities
- G0/No-Go display lights red or green when upper and lower tolerances are set
- Internal calculations using the simple formula of [F(x)=Ax] are available
- ABSOLUTE (ABS) linear scale eliminates the need for setting the origin point every time the micrometer is powered on
- Origin reset is not required even when data is re-displayed after disappearance due to insufficient illumination during use
- SPC output function allows for quick and easy data management in real time
- Functions include Origin set, zero set, Go/No-Go judgement, counting direction switching, power On/Off, data output and inch/mm conversion (on inch/metric models only)
- Alarm: Low voltage, counting value composition error, over-flow error and tolerance limit setting error
- Unlimited response speed eliminates over-speed errors
- IP42 for protection against objects greater than 1mm and water
- Supplied in a fitted plastic case
- Any part number followed with a “B” means that model has a flat back (no lug)
For a dimensional drawing on the Mitutoyo 543-390 ABSOLUTE Digimatic Indicator ID-C Standard Type: Click Here
Mitutoyo Absolute Digimatic ID-C Series Standard Type Electronic Indicators:
ISO/JIS Type Metric:
- 543-390 ID-C Standard Type Digimatic Indicator: 0-12.7mm (.001mm)
- 543-400 ID-C Standard Type Digimatic Indicator: 0-12.7mm (.01mm)
- 543-390B ID-C Standard Type Digimatic Indicator: 0-12.7mm (.001mm)
- 543-470B ID-C Standard Type Digimatic Indicator: 0-25.4mm (.001mm)
- 543-490B ID-C Standard Type Digimatic Indicator: 0-50.8mm (.001mm)
- 543-400B ID-C Standard Type Digimatic Indicator: 0-12.7mm (.01mm)
- 543-474B ID-C Standard Type Digimatic Indicator: 0-25.4mm (.01mm)
- 543-494B ID-C Standard Type Digimatic Indicator: 0-50.8mm (.01mm)
Low Measuring Force Models
- 543-394 ID-C Standard Type Digimatic Indicator: 0-12.7mm (.001mm)
- 543-404 ID-C Standard Type Digimatic Indicator: 0-12.7mm (.01mm)
- 543-394B ID-C Standard Type Digimatic Indicator: 0-12.7mm (.001mm)
- 543-404B ID-C Standard Type Digimatic Indicator: 0-12.7mm (.01mm)
ISO/JIS Type Inch/Metric:
- 543-391 ID-C Standard Type Digimatic Indicator: 0-.500″/12.7mm (.00005″/.001mm)
- 543-401 ID-C Standard Type Digimatic Indicator: 0-.500″/12.7mm (.0005″/.01mm)
- 543-391B ID-C Standard Type Digimatic Indicator: 0-.500″/12.7mm (.00005″/.001mm)
- 543-471B ID-C Standard Type Digimatic Indicator: 0-1.00″/25.4mm (.00005″/.001mm)
- 543-491B ID-C Standard Type Digimatic Indicator: 0-2.00″/50.8mm (.00005″/.001mm)
- 543-401B ID-C Standard Type Digimatic Indicator: 0-.500″/12.7mm (.0005″/.01mm)
- 543-475B ID-C Standard Type Digimatic Indicator: 0-1.00″/25.4mm (.0005″/.01mm)
- 543-495B ID-C Standard Type Digimatic Indicator: 0-2.00″/50.8mm (.0005″/.01mm)
Low Measuring Force Models
- 543-395 ID-C Standard Type Digimatic Indicator: 0-.500″/12.7mm (.00005″/.001mm)
- 543-405 ID-C Standard Type Digimatic Indicator: 0-.500″/12.7mm (.0005″/.01mm)
- 543-395B ID-C Standard Type Digimatic Indicator: 0-.500″/12.7mm (.00005″/.001mm)
- 543-405B ID-C Standard Type Digimatic Indicator: 0-.500″/12.7mm (.0005″/.01mm)
ANSI/AGD Type Inch/Metric:
- 543-392 ID-C Standard Type Digimatic Indicator: 0-.500″/12.7mm (.00005″/.001mm)
- 543-402 ID-C Standard Type Digimatic Indicator: 0-.500″/12.7mm (.0005″/.01mm)
- 543-392B ID-C Standard Type Digimatic Indicator: 0-.500″/12.7mm (.00005″/.001mm)
- 543-472B ID-C Standard Type Digimatic Indicator: 0-1.00″/25.4mm (.00005″/.001mm)
- 543-492B ID-C Standard Type Digimatic Indicator: 0-2.00″/50.8mm (.00005″/.001mm)
- 543-402B ID-C Standard Type Digimatic Indicator: 0-.500″/12.7mm (.0005″/.01mm)
- 543-476B ID-C Standard Type Digimatic Indicator: 0-1.00″/25.4mm (.0005″/.01mm)
- 543-496B ID-C Standard Type Digimatic Indicator: 0-2.00″/50.8mm (.0005″/.01mm)
Low Measuring Force Models
- 543-396 ID-C Standard Type Digimatic Indicator: 0-.500″/12.7mm (.00005″/.001mm)
- 543-406 ID-C Standard Type Digimatic Indicator: 0-.500″/12.7mm (.0005″/.01mm)
- 543-396B ID-C Standard Type Digimatic Indicator: 0-.500″/12.7mm (.00005″/.001mm)
- 543-406B ID-C Standard Type Digimatic Indicator: 0-.500″/12.7mm (.0005″/.01mm)
Reviews
There are no reviews yet.