Product Description
542-711-1 Laser Hologage LGH Series 542: .4″/10mm
The Laser Hologage LGH has the following specifications:
- Range: .4″/10mm
- Accuracy: ±0.1µm
- Resolution: 0.0000005″ / 0.5µin / 0.000005mm / 0.005µm
- Repeatability: 0.2µm
- Inch Resolution: Refer to the applicable counters
- Length standard: Laser-hologram measurement sensor
- Max. response speed: 250mm/s
- Contact point: R1.5mm carbide
- Stem: 15mm
- Bearing type: High precision linear ball bearing
- Measuring force: Refer to the list of specifications
- Output signal: 90 Degree phase difference, Differential Square wave (RS-422A equivalent)
- Retrace Error: 0.05µm
- Storage Humidity Range: RH 20 to 80% (no condensation)
- Storage Temperature Range: -10 to 60˚C
- Signal pitch: 0.25um
- Cable length: 80″/2m
The Mitutoyo 542-711-1 LGH Laser Hologage offers an extremely accurate, ultra-high-resolution photoelectric reflective linear encoder (0.01 models) or ultra-high-resolution laser interference (0.005 models) which provides superior performance over its entire measuring range of 10mm. Includes excellent measuring stability which resists unfavorable environmental conditions, such as, air movement and atmospheric pressure changes.
Features:
- Range: 10mm (.4”)
- LGH/counter bundles have switchable resolutions of: 5nm/0.005μm* (.1 μin*), 0.01μm (.5 μin), 0.1μm (5 μin), 0.5μm (20 μin), 1μm (50 μin)
- Low measuring force models are available (542-716A, 542-721A) for measuring easily deformed workpieces or delicate films
- Measurement data can be stored and controlled by PC software.
- High precision linear ball bearings are used in the spindle guide for smooth movement and exceptional durability
- Every LGH series gage is bundled with a dedicated counter
Applicable Counters for 541-711-1:
- EH counter (542-075A, 542-071A)
- EG counter (542-015)
Optional Accessories:
- 238773: Rubber boot
- 971751: Stem fixture for fixing to top surface
- 971752: Stem fixture for fixing to bottom surface
- 971753: Spindle lifting cable
- 971750: Laser Hologage stand
Specifications:
- Force: 0.55N/0.45N/0.35N
- Stem Dia: 15mm
If this is not the Mitutoyo probe you are in need of we carry the whole probe line. You can view the other probes Mitutoyo has available by Clicking Here.
If this page does not have the Mitutoyo specifications you are trying to locate you can view the manufacturer page by Clicking Here.
Only logged in customers who have purchased this product may leave a review.
Request Quote
Reviews
There are no reviews yet.