The SPG-1000 digital surface profile gauge will allow the peak to valley height of blast cleaned surfaces to be accurately measured. The surface profile gauge is initially set to zero plate and the foot is then placed on the blasted profile. The foot sits on top of the peaks and the sharp stylus travels to the bottom of the valley, allowing the surface profile gauge to display the peak to valley height. A number of measurements can be made and the average taken.
Technical Specifications for the SP-1000:
Display: 4-digit LCD
Measuring Range: 0-800 microns (0-30mils)
Accuracy: +/-5% or 5 microns (Whichever is greater)
Resolution: 1 micron (0.1mils)
Read out: Inch or Metric
Measurement Speed: >30 readings/minute
Operating Temp: 0-50 Degrees C <80%RH
Power 4 AAA Batteries (<50gf)
Dimensions: 162 x 65 x 28mm
Supplied in Carrying Case with Glass Zero Plate
Calibration certificate and Batteries
If you have any questions about the SP-1000 Surface Profile Gage or want to see if this gage will work for a specific application, please call, live chat or email us at firstname.lastname@example.org.