GS Tooling WorkholdingsGS Tooling 546452 HSK100A Shrink Fit Holder with Coolant Port

GS Tooling 546452 HSK100A Shrink Fit Holder with Coolant Port

Name: GS Tooling 546452 HSK100A Shrink Fit Holder with Coolant Port
SKU: 546452
Availability: InStock

Product Code: 546452

MFGID: 546452

Brand: GS Tooling

Hole Diameter: 3/4"

Gage Length: 4.13"

Request Quote

Product Description

546452 GS Tooling HSK100A Shrink Fit Holders with Coolant Port: 3/4″

The GS Tooling 546452 HSK100A Shrink Fit Holders with Coolant Port has the following specifications:

Hole Diameter: 3/4″

Gage Length: 4.13″

D2: 1.30″

D3: 1.65″

L: 2.05″

Taper: HSK100A

Simple and fast. The total time elapsed to remove one cutting tool and insert another is less than 10 seconds.

Four coolant ports come standard for through-spindle coolant capability, allowing for even faster cutting speeds!

Balanced & Certified – the best out there! G2.5 at 30,000rpm (CAT/BT 30, 40, HSK63A), G2.5 at 25,000rpm (CAT50, HSK100A)

Tool is gripped 360° along the entire length of the bore. This results in maximum clamping force, greater rigidity, and an exceptional concentricity (0.0001″/0.003mm). You can run your machine at faster speeds and feeds with no
danger of the tool slipping or bending.

Short projections are possible because no mechanical clamping devices are used. No moving parts and low centrifugal forces due to low holder mass allow for a long holder life with tighter tolerances.

Chip load is distributed evenly along the cutting edge of the tool which results in longer tool life.

If this collets page does not have the specifications or information you are searching please visit the SOWA Tool company website. You can find their website by Clicking Here.

GS Tooling HSK100A Shrink Fit Holders with Coolant Port – Inch

546432 HSK100A Shrink Fit Holders with Coolant Port – Inch: 1/4″

546436 HSK100A Shrink Fit Holders with Coolant Port – Inch: 5/16″

546440 HSK100A Shrink Fit Holders with Coolant Port – Inch: 3/8″

546442 HSK100A Shrink Fit Holders with Coolant Port – Inch: 3/8″

546444 HSK100A Shrink Fit Holders with Coolant Port – Inch: 1/2″

546446 HSK100A Shrink Fit Holders with Coolant Port – Inch: 1/2″

546448 HSK100A Shrink Fit Holders with Coolant Port – Inch: 5/8″

546450 HSK100A Shrink Fit Holders with Coolant Port – Inch: 5/8″

546452 HSK100A Shrink Fit Holders with Coolant Port – Inch: 3/4″

546454 HSK100A Shrink Fit Holders with Coolant Port – Inch: 3/4″

546456 HSK100A Shrink Fit Holders with Coolant Port – Inch: 1″